rewards
Rewards paid in $PRINT, claim any time
Fees are not sold or swapped. They are shared in $PRINT, pro-rata to every eligible holder, and wait in the token contract until you claim. No staking, no lock-up.
$PRINT · Ethereum Mainnet
Money that prints.
Every transfer, every word spoken on Ethereum and every AI credit bought pays $PRINT holders. Hold it, and Ethereum prints for you.
How Printher worksBuy $PRINTsoonSpeak
- of every transfer → holders
- 1%
- of every speak → holders
- 100%
- of AI credits → holders
- ≥20%
Your rewards
Switches on at launch
preview · example
Ready to claim soon
1,284.52$PRINT
Rewards switch on at launch. This is what the card shows once $PRINT is live.
- Your balance
- 2,500,000
- Claimed so far
- 9,870.1
- Share of eligible supply
- 0.36%
What Printher does
the book
Words live on Ethereum forever
Pay $PRINT to print a message into the Book. It sits in contract storage on Ethereum Mainnet: no server to switch off, no edit button. Every token you pay goes to holders.
printher ai
Credits for superintelligence
Buy LLM credits for Printher AI with $PRINT. Credits are recorded on-chain against your address. At least 20% of every purchase goes to holders; the rest pays for compute.
The printer
Every token printed to holders, counted on-chain.
A running total of the $PRINT paid out to holders, read straight from the token contract, and where each part came from.
Printed to holders so far
at launchThe counter starts at launch.
Once $PRINT is live this reads the total paid out to holders straight from the token contract, and splits it by where it came from.
By source
- Transfers1% of every transfer
- Speak100% of every speak
- AI credits≥20% of every AI credit
- Tipssent straight to holders
The Book
Today’s edition
The latest words printed on Ethereum. Every one of them paid holders in full.
The Book opens at launch
Words printed here are stored on Ethereum for good, and 100% of the $PRINT paid for them goes to holders. These are samples of what it will look like.
- 0xa11c…0a11example
Hold, speak, compute. Ethereum prints for whoever is still here.
- 0xb0b0…0b0bto0xca70…0ca7/buildersexample
Shipping a small bot that reads the Book and answers with Printher AI. Bought the credits with $PRINT, so holders got paid twice.
- 0xd00d…0d00/gmexample
gm. First words of the day, and every holder just got a little richer for it.
How it works
Three ways Ethereum prints for holders.
01· hold
Hold, and every transfer pays you.
1% of every $PRINT transfer is shared with all eligible holders, pro-rata to their balance. Your share builds up in the token contract; claim it whenever you like.
1% per transfer · capped at 3% · claim any time
02· speak
Speak, and your words go on-chain.
Pay $PRINT to write up to 560 bytes into the Book on Ethereum. Pay the minimum or more; 100% of it is shared with holders in the same transaction.
from 1,000 $PRINT · 100% to holders
03· compute
Compute, and pay the model in $PRINT.
Buy LLM credits for Printher AI with $PRINT. A share of every purchase goes to holders, never less than 20%; the rest funds the model that answers you.
1 credit = 1 message · ≥20% to holders
Speak
Say something worth printing for.
Pay $PRINT to put your words in the Book, on Ethereum, for good. Every token you pay is shared with holders the moment it lands.
- Up to 560 bytes, stored in contract storage. No edits, no deletes.
- From 1,000 $PRINT per message. Pay more if you like; all of it goes to holders.
- Post to a channel, or address it to a wallet to say it to someone.
- One signature and one transaction with permit-capable wallets.
Speak on Ethereum
100% of what you pay goes to $PRINT holders
at launch
Printher AI · .si = superintelligence
Superintelligence, paid in $PRINT.
Printher AI is a chat assistant you pay with on-chain credits. Buy credits with $PRINT, sign in with your wallet, and ask away. Every purchase also pays holders.
- 1 credit = 1 message to Printher AI.
- Credits are bought on Ethereum and recorded against your address. Nothing to top up off-chain.
- ≥20% of every purchase goes to holders; the rest pays for compute. Holders never get less than 20%.
- Sign in with one wallet signature. No email, no password.
Buy credits
LLM credits for Printher AI
soon
Rewards
Your cut is simple math.
Every fee is split across the eligible supply. The part of it you hold is the part you get, paid the moment the fee is.
The formula
Your rewards equal your $PRINT divided by the eligible supply, times every fee paid.
- Fees in: 1% of every transfer, 100% of every speak, ≥20% of every AI credit, plus any tips.
- Eligible supply is every $PRINT except the Uniswap pool, the protocol contracts and the burn address. They hold tokens but never earn.
- Your share is set aside the moment a fee is paid. Nothing to stake, nothing to lock.
- Selling or moving tokens doesn't erase what you've already earned.
- Claims carry no transfer fee. Claim whenever you like.
Rewards estimator
Your assumptions, the protocol's math
illustration, not a promise
0.1% of supply
≈ 1,000,000 $PRINT
$PRINT
Every buy, sell and wallet-to-wallet transfer pays the fee.
$PRINT
$PRINT
Assumptions · eligible 70% · fee 1% · AI 50%
%
%
%
The Uniswap pool, the protocol contracts and the burn address hold $PRINT but never earn, so the eligible supply is smaller than the total. The fee is capped at 3% and holders always get at least 20% of AI credits.
Estimated rewards
≈ 285.7
$PRINT per day
- From transfers142.9
- From speak71.4
- From AI credits71.4
Per 30 days≈ 8,571
Your share of every fee0.14%
An illustration, not a promise. It assumes activity stays flat at the numbers you typed. Real rewards depend entirely on on-chain activity and can be zero. Not financial advice.
Token
Token facts.
One fixed supply, one fee, one pool. $PRINT is a plain ERC-20 with permit, plus the reward accounting.
- No mint after launch. No blacklist, no pause, no max-wallet traps.
- Nobody can stop you from selling.
- The owner can tune the fee within the 3% cap, and can renounce.
- Name
- Printher
- Ticker
- Total supply
- 1,000,000,000 · fixed
- Decimals
- 18
- Network
- Ethereum Mainnet · chain 1
- Transfer fee
- 1% to holders · cap 3%
- DEX
- Uniswap V2 · PRINT/WETH
- Contract (CA)
- soon
- Book contract
- soon
- Credits contract
- soon
FAQ
Questions, answered plainly.
What is Printher.si?
A token and three Ethereum contracts built around one idea: activity should pay the people who hold. $PRINT takes a small fee on transfers, the Book lets anyone pay $PRINT to put words on-chain, and Printher AI sells LLM credits for $PRINT. All three send rewards back to holders.
Printher reads as "Print Ethereum". The .si stands for superintelligence.
How do I earn?
Hold $PRINT in a regular wallet. Every time a fee is paid, it is split across the eligible supply and your share is set aside for you in the token contract. Connect on this page and press Claim whenever you like. There is nothing to stake and no lock-up.
Moving or selling $PRINT does not wipe what you have already earned; pending rewards stay claimable.
Where do the fees go?
The 1% transfer fee and every $PRINT paid to speak go to holders in full, in the same transaction. For AI credits, at least 20% of each purchase goes to holders and the rest goes to the Printher treasury, which pays for the model compute.
The Uniswap pool, the protocol contracts and the burn address are excluded, so rewards go to real holders instead of sitting in a pool.
Why Uniswap V2?
$PRINT takes its fee inside transfer(). Uniswap V2 handles that through its fee-on-transfer swap functions. Uniswap V3 and V4 pools assume the amount sent is the amount received, so they do not work with fee-on-transfer tokens. The launch pool is $PRINT/WETH on V2.
What does it cost to speak?
At least the minimum set in the Book contract (1,000 $PRINT at launch) plus Ethereum gas. You can pay more than the minimum if you like. A message is up to 560 bytes, can go into a channel and can be addressed to a wallet.
Every $PRINT you pay is shared with holders in the same transaction. With a permit-capable wallet it is one signature and one transaction.
What are AI credits?
Credits are how you pay Printher AI. You buy them on Ethereum with $PRINT (100 $PRINT per credit at launch). They are recorded against your address, and each message to the assistant uses one credit.
Holders get at least 20% of every purchase. The split can be tuned, but the contract never lets the holder share drop below 20%.
Are the contracts audited?
Not yet. The contracts are built on OpenZeppelin v5 and have a test suite, but no third-party audit has been completed. If that changes it will be announced here and on X. Until then, treat them as unaudited and only use what you can afford to lose.
Who controls the contracts?
Each contract has an owner, transferred in two steps, and ownership can be renounced. The owner can adjust the transfer fee up to a hard cap of 3%, mark addresses fee-exempt, exclude contracts (never regular wallets) from rewards, and tune the Book minimum and the AI credit price and split.
The owner cannot mint new $PRINT, blacklist anyone, pause trading or stop anyone from selling. Total supply is fixed at 1,000,000,000.
Is this financial advice?
No. Nothing on Printher.si is financial advice or a promise of returns. Rewards depend entirely on how much $PRINT moves, speaks and buys credits. If activity stops, rewards stop. Do your own research.
How do I buy $PRINT?
$PRINT is not live yet, so there is nothing to buy today. At launch the contract address and a buy link appear on this page and on x.com/GetPrinther.
When it is live, buy only through the address shown here, on Uniswap V2, with slippage set a little above the 1% transfer fee. Anything calling itself $PRINT before then is not this token.
Print Ethereum
Hold it, and Ethereum prints for you.
Every transfer, every word in the Book and every AI credit pays $PRINT holders. Follow along on X for the launch and the contract address.
Buy $PRINTsoonFollow @GetPrinther
Not financial advice. Contracts unaudited.